Products Categories

ESMFS M10 Threaded Side-mounted stainless steel SPST Right Angle Single Float Switch

The ESMFS stainless steel angled single float switch is a level control instrument specifically designed for special installation environments. It is based on a standard vertical rod float switch, with an added 90-degree (or specific angle) modification, allowing the float detection point to deviate from the vertical axis of the installation interface. This design mainly addresses the challenges when the center of the container top is occupied, requiring lateral detection or avoiding internal obstacles, while retaining the corrosion-resistant, high-temperature resistant, and sanitary characteristics of stainless steel.

Application scenarios:
Industrial water treatment: liquid level alarms and controls in electroplating tanks, pickling tanks, and cooling towers.
Agricultural irrigation: automatic water replenishment for reservoirs and water tanks.
Marine and shipping: bilge water monitoring and freshwater tank level control (marine-certified products required).
Food and beverage: fermentation tanks and storage tanks (sanitary stainless steel material required) ...

product details

Working Principle

The stainless steel float switch mainly consists of a float, a float rod, a switch assembly, and a housing. The float is usually made of 316L stainless steel, hollow inside, and can float on the liquid surface. The float rod connects the float to the switch assembly. When the liquid level changes, the float drives the float rod to move up and down, causing the switch assembly to close or open, thereby controlling the circuit connection or disconnection.

Product Features

1. Flexible layout: Not restricted by the installation hole position, you can extend it wherever you want to measure.
2. Anti-interference: The float can be placed in a calm area away from the inlet and agitator, improving measurement stability.
3. Hygienic and durable: Fully stainless steel welded, with no sanitary dead corners, easy to clean (CIP/SIP), resistant to acid and alkali corrosion.
4. Single-point precision: Focuses on controlling a key liquid level point (such as overflow prevention or dry-run prevention), with a simple structure and low failure rate.

Product detail

Technical Specifications

TYPES	Low pressure	high pressure
Maximum power	10W	50W
Maximum switching voltage	100VDC	220VDC
Maximum switching current	0.5A	1.5A
Minimum collapse voltage	220VDC	300VDC
Maximum load current	1A	3A
Maximum contact resistance	100mΩ	100mΩ
temperature range	-20~+80	-20~+80
Float material	SUS304/316	SUS304/316
Card spring material	SUS304/316	SUS304/316