ESMWLPSH 4-20mA output Stainless steel Hydrostatic liquid level transmitter for oil

When the balance cover of the transmitter is put into a certain position in the liquid to be measured, the pressure applied by the sensor through the air pipe is: P=9.807ρ.H+Po
Where: P: Pressure felt by the sensor, unit: Pa
              ρ: liquid density to be measured, unit: kg/m
              H: depth of the liquid to be measured, unit: m
Po: pressure on the liquid surface, unit: Pa
If the back cavity of the sensor communicates with the top of the liquid, then Po is zero, so it is equal to about 0.102P/p, and the transmitter converts the pressure signal when it is sensed into an electrical signal, which is proportional to the height of the liquid surface.
Note: The container of the liquid to be measured must be open to the atmosphere, ie it is open and cannot be closed. Otherwise, the measurement result will be meaningless.

1.Strong anti-interference, long-term stability, high precision, high performance/price ratio
2.directly into the measured media, installation and use is very convenient
3.Solid structure, no moving parts, high reliability, long service life
4.No material fatigue wear, insensitive to vibration, impact
5.With power inversion and overload current limiting protection
6.There are dial indicator, LED, LCD head display can be selected
7.Optional temperature compensation, high temperature

1. High-temperature hot water, steam condensate, heat transfer oil tanks
2. Chemical acid and alkali tanks, electroplating tanks, wastewater treatment tanks
3. Slurry tanks, residue slurry tanks, viscous liquid storage tanks
4. Industrial liquid level monitoring for substances that easily crystallize or scale