Low price UB300-18GM40 ultrasonic proximity switch sensor with pnp / npn output
Working Principle
The ultrasonic proximity switch's transmitter emits high-frequency ultrasonic waves. When these waves encounter an object, they are reflected back. The receiver captures the reflected echoes, and by measuring the time it takes for the ultrasonic waves to travel from transmission to reception, and combining this with the propagation speed of ultrasound in air, the distance between the sensor and the object can be calculated. When the distance reaches a preset threshold, the switch outputs the corresponding signal.
Product Features
1.5 different output functions can be set
2.Selectable sound lobe width
3. Program input
4.Synchronization options
5.Deactivation option
6.Temperature compensation
7.Very small unusable area
Product detail
Technical Specifications
|
Product model |
UB300-18GM40-E4- V1 |
UB800-18GM40-E4- V1 |
UB300-18GM40A-E4- V1 |
UB800-18GM40A-E4- V1 |
|
UB300-18GM40-E5- V1 |
UB800-18GM40-E5- V1 |
UB300-18GM40A-E5- V1 |
UB800-18GM40A-E5- V1 |
|
|
Detection range |
50...300mm |
50...800mm |
50...300mm |
50...800mm |
|
Detect dead zones |
0...50mm |
0...50mm |
0...50mm |
0...50mm |
|
Transducer frequency |
About 390kHz |
About 205khz |
About 390khz |
About 205khz |
|
Response time |
About 30ms |
About 100ms |
About 30ms |
About 100ms |
|
Switching frequency |
≤13hz |
≤4hz |
≤13hz |
≤4hz |
|
Output type |
E4 NPN NO/NC |
|||
|
E5 PNP NO/NC |
||||
|
Operating voltage |
10-30VDC ripple 10% |
|||
|
Rated operating current |
200mA short-circuit protection/overload protection |
|||
|
Repeatability |
≤1% |
|||
|
Range adjustment |
The farthest and closest ranges are adjusted by the adjustment line |
|||
|
Degree of protection |
IP65 |
|||
|
Connection method |
V1 (4-pin) M12 cable/2m PVC cable |
|||
|
LED yellow light |
The switch status indicates that the yellow light is flashing The target is detected in the set state |
|||
|
LED red light |
Solid red light: Error Flashing red light: No target detected in the set state |
|||
|
Product number |
UB300-18GM40(A)-I-V1 |
UB800-18GM40(A)-I-V1 |
|
UB300-18GM40(A)-U-V1 |
UB800-18GM40(A)-U-V1 |
|
|
examination range |
50~300mm |
50~800mm |
|
Detection blind zone |
0~50mm |
0~50mm |
|
Transducer frequency |
about 390khz |
about 255khz |
|
Response time |
about 50ms |
about 100ms |
|
Standard target board |
100*100mm |
|
|
Output type |
I:4~20mAShort circuit / overload protection |
|
|
U:0~10V |
||
|
Operating Voltage |
I:10~30VDC U:15~30VDC |
|
|
No-load current |
≤20Ma |
|
|
Repeatability |
≤1% |
|
|
Range adjustment |
Adjust the farthest and closest range by adjusting the line |
|
|
Protection level |
IP65 |
|
|
Connection method |
V1 (4 pin) M12 cable / 2 m PVC cable |
|
|
LED yellow light |
The switch status indicates that the yellow light is blinking. The target is detected in the set state. |
|
|
LED red light |
Steady red light: Error Red flashing: No target detected in the setting state |
|