TL-Q5M ABS material Non-contact detection inductive proximity switch
Working Principle
The inductive proximity switch consists of a high-frequency oscillation circuit, a detection circuit, an amplification circuit, and an output circuit. At the front end of the sensor, there is an oscillation coil. When a metal object approaches this oscillation coil, eddy currents are generated inside the metal object. These eddy currents absorb the energy of the oscillation circuit, causing the oscillation to weaken until it stops. By detecting changes in the oscillation state, the detection and amplification circuits process the signal, and the output circuit then outputs the detection signal, thereby realizing the detection of metal objects.
Product Features
1. Square appearance, stable installation, no rotation Flat installation, narrow spaces
2. IP67 protection, oil-resistant, washable Suitable for food processing and machine tool coolant environments
3. Non-contact, no wear, long lifespan High-frequency counting, high-speed assembly lines
4. Wide voltage/protection, durable, not easy to break Suitable for sites with large power fluctuations and prone to wiring errors
5. Visualized, with LED light Equipment requiring quick debugging and maintenance
Product detail
Technical Specifications
|
SIZE(mm) |
17*17*28mm |
||
|
DC type |
NPN |
NO |
TL-Q5MC1 |
|
NC |
TL-Q5MC2 |
||
|
PNP |
NO |
TL-Q5MF1 |
|
|
NC |
TL-Q5MF2 |
||
|
DC two-wire |
NO |
TL-Q5MD1 |
|
|
NC |
TL-Q5MD2 |
||
|
AC type |
AC type two-wire NO |
TL-Q5MY1 |
|
|
AC type two-wire NC |
TL-Q5MY2 |
||
|
Detection distance |
5mm±10% |
||
|
Set distance |
0~4mm |
||
|
Control output |
N.P type: 300 mA or less, D type: 200 mA or less, A type: 400 mA or less |
||
|
Standard inspection object |
Iron: 18*18*1 |
||
|
shell material |
ABS |
||
|
Supply voltage |
6-36VDC/90~250VAC |
||
