UB2000-T30 2000mm Long Range ultrasonic sensor for size detection
Working Principle
The ultrasonic proximity switch's transmitter emits high-frequency ultrasonic waves. When these waves encounter an object, they are reflected back. The receiver captures the reflected echoes, and by measuring the time it takes for the ultrasonic waves to travel from transmission to reception, and combining this with the propagation speed of ultrasound in air, the distance between the sensor and the object can be calculated. When the distance reaches a preset threshold, the switch outputs the corresponding signal.
Product Features
1.M30 Installation
2.Multiple signal outputs
3.Non-contact detection
4.Strong environmental adaptability
5.Wide detection range
6.Unaffected by material
APPLICATION SCENARIOS
1. Precision liquid/level measurement: Close-range level monitoring for small containers, shallow tanks, and funnels
2. Object presence detection: Accurate positioning of robotic arms, assembly lines, and workstations
3. Gap and thickness measurement: Thickness control of metal/non-metal sheets, glass, and films
4. Transparent object detection: Presence verification for transparent materials such as PET bottles, glass, and acrylic
5. Small object counting / anti-pinch: High-speed detection of electronic components, packages, and small logistics items
Product detail
Technical Specifications
|
Product model |
UB500-T30-E4-V15 |
UB2000-T30-E4-V15 |
UB500-T30-E6-V15 |
UB2000-T30-E6-V15 |
|
UB500-T30-E5-V15 |
UB2000-T30-E5-V15 |
UB500-T30-E7-V15 |
UB2000-T30-E7-V15 |
|
|
Detection range |
50...500mm |
80...2000mm |
50...500mm |
80...2000mm |
|
Detect dead zones |
0...50mm |
0...80mm |
0...50mm |
0...80mm |
|
Transducer frequency |
About 380khz |
About 180khz |
About 380khz |
About 180khz |
|
Response time |
About 50ms |
About 150ms |
About 21ms |
About 65ms |
|
Switching frequency |
≤10HZ |
≤3.3HZ |
≤7HZ |
≤2.5HZ |
|
Output type |
E4: NPN NO/NC |
E6：Two ways PNP NO/NC |
||
|
E5: PNP NO/NC |
E7：Two ways NPN NO/NC |
|||
|
Rated operating current |
200mA short-circuit protection/overload protection |
2*100mA short-circuit protection/overload protection |
||
|
Repeatability |
≤0.5% |
≤0.1% |
||
|
Operating voltage |
10-30VDC ripple 10% |
|||
|
Range adjustment |
The farthest and closest ranges are adjusted by the adjustment line |
|||
|
Degree of protection |
IP65 |
|||
|
Connection method |
V15 (5-pin) M12 cable/2m PVC cable |
|||
|
LED yellow light |
Always-on: powered on Flashing: The target is detected in the set state |
|||
|
LED red light |
Solid: Switch status output Blinking: Set |
|||
|
Product number |
UB500-T30-I-V15 |
UB2000-T30-I-V15 |
|
UB500-T30-U-V15 |
UB2000-T30-U-V15 |
|
|
examination range |
50~500mm |
70~2000mm |
|
Detection blind zone |
0~50mm |
0~70mm |
|
Transducer frequency |
about 380khz |
about 205khz |
|
Response time |
about 50ms |
about 125ms |
|
Standard target board |
100*100mm |
|
|
Output type |
I:4~20mAShort circuit / overload protection |
|
|
U:0~10V |
||
|
Operating Voltage |
I:10~30VDC U:15~30VDC |
|
|
No-load current |
I:≤45Ma U:≤50mA |
|
|
Repeatability |
Full scale is worth ±1.5% |
|
|
Range adjustment |
Adjust the farthest and closest range by adjusting the line |
|
|
Protection level |
IP65 |
|
|
Connection method |
V15 (5 pin) M12 cable / 2 m PVC cable |
|
|
LED yellow light |
The switch status indicates that the yellow light is blinking. The target is detected in the set state. |
|
|
LED red light |
Steady red light: Error Red flashing: No target detected in the setting state |
|